Guangzhou Baikang Sports Material Co.,Ltd

Product introduction
ABUIABACGAAg-tPahwYowOufiQMw1Ac4sAQ


Acrylic court

Acrylic materials are products recognized by the International Tennis Federation (ITF). They are completely environmentally - friendly materials with high cost - effectiveness, do not fade, and have vivid colors. They are suitable for outdoor sports fields, such as basketball courts, tennis courts, volleyball courts, table tennis courts, and some five - a - side and seven - a - side football fields, as well as park landscape pavements. They are suitable for construction on cement concrete bases and asphalt concrete bases.


Structure and Advantages
Picture and text display 3264

Picture and text display 3264

副标题

Water-based hard court acrylic
Elastomeric acrylic
Super wear-resistant acrylic
Water-based hard acrylic sports court

——
Green and environmentally friendly, with high anti - ultraviolet performance. The color is long - lasting and deep, without fading or peeling off. It is easy to maintain and has low maintenance costs. It is sturdy and durable under any climatic conditions.

Provide high - quality sports field surface materials, and are highly recommended as economical leisure and professional tennis court and basketball court surface systems.

The thickness is from 1.8mm to 2mm.
Affordable price
Elastic acrylic stadium
——
The surface layer of Baikang elastic acrylic is made of 100% acrylic materials, and the elastic layer is composed of a mixture of rubber powder and water-based emulsion layer.

It has excellent toughness and can cover fine cracks generated by the foundation;
It has good shock absorption performance, reducing the shock received by the feet and legs of the players.

The thickness is: 3mm~5mm.
Excellent toughness and shock - absorbing performance
Wear-resistant acrylic basketball court
——
The newly launched wear-resistant acrylic material by Baikang is a two-component acrylic material developed for the needs of parking lots. It is designed according to the physical characteristic requirements of outdoor parking lots and has the characteristics of high hardness, super wear resistance, and resistance to climate and powdering. It solves the problem of low hardness and poor resistance to car rolling and wear of traditional acrylic materials, and at the same time solves the problem of poor outdoor climate resistance and easy powdering of traditional epoxy floor paints used in parking lots.

The base surface leveling layer is composed of acrylic primer and cement sand, and the two-component water-based acrylic topcoat is used as the wear-resistant surface layer.

The thickness is 1.8mm~2mm
Acrylic that can be parked on
Product parameters





Shock absorption

35~50

Qualified

Vertical deformation

1.7

Qualified
Skid resistance value (20℃) BPN

49

Qualified

Tensile strength

0.90Qualified

Elongation at break

151Qualified

Flame retardancy/Class

Class 1

Qualified
Chemical performance
Chemical properties


Testing itemsLimit valuesUnitsMethod detection limit (MDL)Test results

Soluble aluminum (AI )

70000mg/kg50Not detected
Soluble arsenic (As)47mg/kg10Not detected
Soluble boron (B)15000mg/kg50Not detected
Soluble barium (Ba)18750mg/kg50Not detected
Soluble cadmium (Cd)17mg/kg5Not detected
Soluble cobalt (Co) 130mg/kg 10Not detected
Soluble trivalent chromium (Cr(III)) 460mg/kg 5Not detected
Soluble copper (Cu) 7700mg/kg 50Not detected
Soluble mercury (Hg) 94mg/kg 10Not detected
Soluble manganese (Mn) 15000mg/kg 50Not detected
Soluble nickel (Ni) 930mg/kg 10Not detected
Soluble lead (Pb) 160mg/kg 10Not detected
Soluble antimony (Sb) 560mg/kg 10
Construction steps
1. Basic treatment
Treat the cement or asphalt foundation according to the construction guidance. After the treatment, the foundation strength shall reach the C25 strength of the building concrete standard.
2. Water accumulation repair
Sprinkle water on the entire site to find the areas with water accumulation. Mark them with a pen and then dry the site. Use a ruler or a scraper to level the areas with water accumulation by scraping.
3. Roll - coat the primerRoll - coat the special primer on the foundation surface layer.
4. Trowel the middle coating
Use a toothed trowel for troweling and distribute the dosage for troweling according to the thickness standard.
5. Roll - coat the interface agent
Roll - coat the special interface agent on the reinforced layer.
6. Trowel the top - coat layer
Prepare the materials according to the different uses of the site and trowel the materials on the base surface with a toothed trowel.
7. Line - marking paint Measure and locate according to the standard dimensions, mark the position of the boundary line, and brush the special line - marking paint between the masking tapes.
Applicable places
School sports field
—————————
School Playground
Ball court
----------
Court Field
Residential area / Park
——————————
Community / Park
Kindergarten
—————————
Kindergarten
Case display
Product display 3281 (1)

Product display 3281 (1)

副标题

4,000-square-meter acrylic court of Yudong No. 3 Middle School in Yulin, Guangxi
Breathable track + acrylic court of Heping Middle School in Shantou
Acrylic court of Baise Branch of the Affiliated High School of Guangxi University